Anti-vibration Pads
TICO 2 Part Epoxy Adhesive
Tico 2 Part Epoxy Adhesive 600g. This two part epoxy adhesive is designed to provide excellent bonding properties, particularly in applications with large lateral movements such as TICO Bond-slip Pipe Supports.
TICO Contact S Adhesive
Contact Adhesive S is a cream coloured, brushable, general-purpose contact adhesive. It exhibits excellent adhesion to most surfaces and has good heat resistance. Bonds may be made over a wide range of open times because of its fast flash off and long open time.
Bolt Isolation Washer
TICO S/WA Bolt Isolation Washer is used to prevent transmission of vibration and machine noise through the bolt to the surrounding area.
Bolt Isolation Collar
TICO S/CO Bolt Isolation Collars are used to prevent transmission of machine noise and vibration through the bolt to the surrounding area.
TICO Z/PA - Specialist
TICO Z/PA is an anti vibration pad of elastomer composite, based on polychloroprene rubber enhanced with the inclusion of cork
TICO VR/PA Specialist
TICO VR/PA is a anti vibration laminated elastomeric pad comprising of synthetic rubber, modified by the inclusion of cork, reinforced with piles of high tensile fabric.
TICO HT/PA - Specialist
Synthetic rubber and granulated cork having improved physical characteristics designed to withstand elevated temperatures. Particularly suitable for high temperature pipework applications and anti-vibration applications at elevated temperatures
TICO FR/PA - Specialist
TICO FR anti vibration material consists of a blend of polymers and specialised compounding ingredients developed to operate in the aggressive environments in the offshore and petrochemical industries.
TICO B/PA - Specialist
TICO B/PA is a medium stress anti-vibration and seating suitable for a wide variety of application in the industrial and offshore industries.
TICO VHT/PA - Specialist
BTICO VHT/PA is a silicone based isolation sheeting that can maintain flexibility in high and low temperature environments.
TICO Adjustamount - Levelling
TICO Adjustamounts (levelling mounts) are specially designed for mounting machines and structures where accurate levelling is of prime importance, and where slight additional height is required.
TICO Shimming - Levelling
TICO S/SH Shimming is commonly used in conjunction with other TICO pads (e.g. TICO S/PA), to provide a quick and efficient way of levelling plant without compromising the vibration isolating properties of the main pads.
TICO FF/PA - Heavy Impact Pad
TICO FF/PA is a heavy duty combination pad, it is normally based on TICO PF/PA material, bonded to a conformable layer.
TICO PF/PA - Shock Impact Pad
TICO PF/PA pads should be used where the material’s high stiffness and impact absorption properties are especially important. Typical applications are for impact absorption on piling hammers, sheet piling buffers and as resilient spigot packings.
TICO RF/PA - High Load Bearing
High load-bearing pad material. Plies of synthetic rubber proofed cotton with interplies of neoprene rubber, modified with cellular particles. One side is faced with a thin layer of rubber bonded cork material to absorb irregularities in the concrete surface.
TICO CF/PA 80 - Low Frequency
Like the Tico CF/PA/10, the CF/PA/80 Anti-vibration pad is composed of a micro cellular rubber sponge with upper and lower surfaces of geotextile fabric which protect the rubber and facilitate bonding.
TICO CF/PA 10 - Low Frequency
TICO CF/PA 10 Anti-vibration pads are composed of a micro cellular rubber sponge with upper and lower surfaces of geotextile fabric which protect the rubber and facilitate bonding.
TICO LF/PA 80 - Fluted Low Freq
The LF/PA/80 Anti Vibration Pad is the same compound material as the LF/PA/10 but has a higher load bearing range. These pads also have a fluted rubber construction which gives the pads excellent low frequency properties. The core is sandwiched between layers of cork not only to facilitate bonding of the pads into position but also allowing, in certain applications, concrete to be poured directly on top of them.
TICO LF/PA 10 - Low Freq Flutted
TICO LF/PA/10 anti vibration pads have a fluted rubber construction which gives the pads excellent low frequency properties. The core is sandwiched between layers of cork not only to facilitate bonding of the pads into position but also allowing, in certain applications, concrete to be poured directly on top of them.
TICO M/PA - General Purpose Pad
Anti vibration pad TICO M/PA is a low stress machinery mounting material made from cork enhanced polyisoprene rubber and is usually specified for low stress applications where situations benefit from its good damping properties.
TICO S/PA - General Purpose Pad
TICO S/PA anti vibration material is a high performance machinery mounting pad. It matches today’s fast changing manufacturing environment, where ease of machine mounting and flexibility of plant layout are prime factors. Suitable for the majority of applications where ease of installation and flexibility of plant layout are prime factors on installations. This pad is compatible with all types of machine base - individual feet (also see TICO Adjustamounts for precision mounting), cast skirts or flat base.