Compression-Packing
Email


2003
Braided Packing PTFE Yarn, Aramid Corners. Style 2003 packing, with its unique combination of PTFE and aramid fibers, is dimensionally stable, non-contaminating, has excellent lubricating and running characteristics, and because of the aramid corners, is very wear resistant. It handles acids, alkalis, and a broad range of chemicals. It is well suited for service in rotary and reciprocating pumps, mixers, agitators and reactors, especially where abrasive wear is a problem.

2005
Braided Packing PTFE Yarn, Dry. Style 2005 is similar to Style 2006S, but is especially suited for oxygen service and other services where lubricants other than PTFE can not be tolerated. Style 2005 is commonly used in valves and lower shaft speed applications. It is resistant to most chemicals, aggressive fluids, gases and solvents, with the exception of molten alkali metals.

2007
Braided Packing Expanded PTFE / Graphite. Style 2007 is chemically inert over the entire 0-14 pH range with these exceptions: molten alkali metals, flourides, aleum, fuming nitric acid, aqua regia, and other strong oxidizing agents.

2018
Braided Packing Synthetic Yarn with PTFE, Dry. Style 2018 is a good general service packing with no lubricant. It can handle a broad range of chemicals in the 3-11 pH range, and is white in color so it will not discolor flow media. This style is typically used in valves and slow speed pumps where contamination from break-in lubricants cannot be tolerated.

2022
Extruded PTFE / Graphite. Style 2022 packing can handle water, steam, oil, solvents, acids and alkalis and can be used for abrasive sludge applications. It is particularly suitable for use in centrifugal pumps, valves, mixers and agitators.

2030
DuPont Nomex with PTFE and Mineral Oil. The high mechanical strength of the NOMEX fibre, combined with the elaborate braiding process, results in a soft and pliable packing with excellent mechanical and chemical resistance. Because of the low coefficient of friction, shaft wear is largely avoided, even at high shaft speeds. No excessive heat build-up between the packing rings and the turning shaft; the packing runs cool, remains soft and flexible, resulting in longer service life.

2044
Braided Packing Spun Aramid Yarn, PTFE Impregnated. Style 2044 is a durable packing able to withstand granular and abrasive applications. It is recommended for service in superheated steam, slurries, petroleum derivatives, solvents, chemicals, liquified gases, pulp and paper stocks, sugar syrups, and other abrasive fluids.

2070
Expanded PTFE / Graphite Yarn with a Kevlar Core. Style 2070 is a superior general service and corrosive service packing. Its high resistance to extrusion (four times higher than conventional PTFE/graphite packings) makes Style 2070 ideal for handling chemically aggressive fluids in high surface speed and high pressure applications.

2500
Rubber Core with PTFE Wrapping. Style 2500 can be used with all kind of tank lids, hatches etc. for ships, barges, road- and rail transport vehicles, storage tanks etc. Developed for the carrying of hazardous liquid cargoes and can be used with most chemicals likely to be carried, i.e. chemicals, solvents, acids, alkalis, oils, foodstuffs etc.

2017
Expanded PTFE /Graphite With Aramid Corners. Style 2017 packing can handle a broad range of chemicals in the 3-11 pH range. It is used in papermill stock pumps, agitators, or any service where high strength and good lubricating qualities are needed.

2019
Braided Packing Synthetic Yarn with PTFE, Lubricated. Style 2019 is an excellent multi-service packing that finds a wide variety of uses throughout a plant. It handles steam, water, solvents, oils, mild acids and alkalies, and a broad range of other chemicals. It is white in color and will not discolor the flow media. This style is recommended for use in centrifugal, rotary and reciprocating pumps and also mixers, agitators, and expansion joints.

2024
Extruded Pure PTFE. Style 2024 packing can handle water, steam, oil, solvents, acids and alkalis and can be used with clear fluids or abrasive sludge. It is particularly suitable for use in centrifugal pumps, valves, mixers, agitators and for sealing dome lids.

2103-T
Braided Packing Carbon Yarn, PTFE Impregnated. Style 2103t packing can handle chemicals over the entire 0-14 pH range except for strong oxidizers. It is very popular in the pulp and paper industry because it is especially designed for applications involving strong caustics, acids, bleaches, slurries, and services where contamination cannot be tolerated. This style is commonly used in valves and pumps, agitators, reactors, and autoclaves.

2421
Braided Packing Ramie Yarn, PRFE Impregnated. Style 2421 is a well lubricated, medium-hard packing with very low frictional characteristics, which assures minimal shaft wear. The ramie yarn is rot and mildew resistant, making the packing ideal for marine use, handling cold water, salt water and cold oils. In the marine industry, it is recommended for sealing stern tube and rudder post stuffing boxes. This style is also used for certain pump and valve applications in the pulp and paper, water/wastewater, and mining industries.

2700
Blue Polyimid with PTFE and Silicone Oil. Style 2700 can be used for demanding applications in rotary and piston pumps, mixers and stirrers, sliders and valves in a wide variety of different industries. It covers a pH-range of 0 - 12 and can be used with water, steam, brine, acids, diluted alkalis, chemicals, solvents, petroleum derivatives etc.

3070
Woven PTFE Gasket Tape. Style 3070 gasket tape is flexible and compresses easily, and gasket extrusion is negligible. It readily conforms to flange irregularities and fills in surface voids even at low flange bolt loads. It handles virtually any chemical service with the exception of molten alkali metals, and can be used in most food processing and pharmaceutical applications.

2777
Braided Packing Novoloid Fiber, PTFE Impregnated. Style 2777 packing is a high performance packing that is well suited to applications where graphite impregnation may not be acceptable. It can handle steam, water, acids and other chemical and solvent applications. This style has multiple uses in chemical plants and pulp and paper mills, and is regularly used in rotating and reciprocating pumps, washer journals, liquor pumps, refiners and digesters.


Edmonton

Hopewell Business Park
#4,  3110-51 Avenue NW
Edmonton, AB   
T6P 0E1

P 780.463.4049
F 780.461.7009
google map
Calgary

Building B - Bay 25
2419 52 Avenue SE
Calgary, AB     
T2C 4X7

P 403.279.7007
F 403.279.7992
google map
Copyright © 2013 Quest Gasket and Supply Inc. All rights reserved.             Powered by Powered by Thinksoft