Compression-Packing
Email


2000
Braided Packing, Flexible Tape. The outstanding properties of this style make it a truly multi-service packing capable of a wide variety of uses throughout a plant. This style may be used in valves, pumps, expansion joints, mixers and agitators in the hostile environments of hydrocarbon processing, pulp and paper, power generation, metal-working and other industries where effective sealing is vital.

2001
Braided Packing Graphite Yarn, Graphite Filled. Style 2001 packing is ideally suited for use in severe service valves and rotary shaft applications. It handles strong acids and alkali solutions except fuming nitric acid, oleum and fluorine. It can be used to seal steam, water, oil, solvents, alkalis, and acids. It is often used as end rings for packing sets utilizing softer packings that might tend to extrude. This style also handles high temperatures, extremely high shaft speeds, most strong chemicals, and reduces shaft wear.

2002
Braided Packing Carbon Yarn, Graphite Filled. Style 2002 handles water, steam, boiler feed, and aqueous solutions of acids and alkalis. In service, it seats quickly and does not require extensive break-in adjustments. This style is commonly used for high speed pumps, blowers, dryers, high temperature valves, and furnace gasketing.

2007
Braided Packing Expanded PTFE / Graphite. Style 2007 is chemically inert over the entire 0-14 pH range with these exceptions: molten alkali metals, flourides, aleum, fuming nitric acid, aqua regia, and other strong oxidizing agents.

2022
Extruded PTFE / Graphite. Style 2022 packing can handle water, steam, oil, solvents, acids and alkalis and can be used for abrasive sludge applications. It is particularly suitable for use in centrifugal pumps, valves, mixers and agitators.

2070
Expanded PTFE / Graphite Yarn with a Kevlar Core. Style 2070 is a superior general service and corrosive service packing. Its high resistance to extrusion (four times higher than conventional PTFE/graphite packings) makes Style 2070 ideal for handling chemically aggressive fluids in high surface speed and high pressure applications.

2138
Braided Packing Ramie Yarn, Parrafin Impregnated. Style 2138 is a well lubricated, medium-hard packing with extremely low frictional characteristics, which assure minimal shaft wear. The ramie yarn is rot and mildew resistant, making the packing ideal for marine use, handling cold water, salt water, and cold oils. In the marine industry, it is commonly used in stern tubes, rudder posts, and tail shaft liners. This style is also used in the pulp and paper, waste/wastewater, steel and mining industries.

2202
Braided Packing Flexible Graphite with Carbon Corners. Style 2202 This extremely versatile packing can be used in many demanding applications, both dynamic and static. This style packing is particularly suited for high temperature and high pressure service in valves, pumps, expansion joints, mixers and agitators. It can handle most chemicals in the 0-14 pH range with the exception of strong oxidizers.

2255
Braided Packing Synthetic Yarn, Graphited, and Lubricated. Style 2255 is a dense, but flexible general service packing that adapts well to worn or scored shafts often found in older equipment. It assures an excellent seal against steam, brine, oil, and mild acids and alkalis. This style is well-suited for applications in rotary and centrifugal pumps and some valves.

2000-IC
Braided Packing Flexible Graphite, Wire Reinforced. Style 2000IC packing is particularly suited for use in high temperature, high pressure steam service. In addition, it can also handle most chemicals, acids and alkalis. This style is excellent for use in steam turbines, high temperature motor-actuated valves and for high pressure/high temperature valve applications in general.

2001-I
Braided Packing Graphite Yarn, Graphite Filled, Wire Reinforced. Style 2001I packing is particularly suited for use in high temperature, high pressure steam service. In addition, it can handle most chemicals, acids and alkalies. This style is excellent for use in steam turbines, high temperature motor-actuated valves and for high pressure, high temperature valve applications in general.

2002-I
Braided Packing Carbon Yarn, Graphite Filled, Wire Reinforced. Style 2002I handles water, steam, boiler feed, and aqueous solutions of acids and alkalis. In service, it seats quickly and does not require extensive break-in adjustments. This style is commonly used in steam turbines, high temperature motor-actuated valves and for high pressure, high temperature valve applications in general.

2017
Expanded PTFE /Graphite With Aramid Corners. Style 2017 packing can handle a broad range of chemicals in the 3-11 pH range. It is used in papermill stock pumps, agitators, or any service where high strength and good lubricating qualities are needed.

2043
Braided Packing Spun Aramid Yarn, Graphited and Lubricated. Style 2043 is a durable packing able to withstand granular and abrasive applications. It is recommended for service in superheated steam, slurries, petroleum derivatives, solvents, chemicals, liquefied gases, pulp and paper stocks, sugar syrups, and other abrasive fluids.

2103-T
Braided Packing Carbon Yarn, PTFE Impregnated. Style 2103t packing can handle chemicals over the entire 0-14 pH range except for strong oxidizers. It is very popular in the pulp and paper industry because it is especially designed for applications involving strong caustics, acids, bleaches, slurries, and services where contamination cannot be tolerated. This style is commonly used in valves and pumps, agitators, reactors, and autoclaves.

2177
Braided Packing Ramie Yarn, Graphited. Style 2177 is a well lubricated, medium-hard packing with very low frictional characteristics, which assure minimal shaft wear. The ramie yarn is rot and mildew resistant, making the packing ideal for marine use, handling cold water, salt water, and cold oils. In the marine industry it is commonly used in stern tubes, rudder posts, and tail shaft liners. This style packing is also used in the pulp and paper, water/wastewater, and mining industries where a softer packing is desired for lower pressure hydraulic applications.

2214
High Temperature, Non-Asbestos Valve Stem Packing. Style 2214 is a firm, high density, non-asbestos packing. It can handle steam, most chemicals, mild acids, and alkalies. It is excellent for use in steam turbines, high temperature motor-actuated slide valves, and in high pressure/high temperature valving in general.


Edmonton

Hopewell Business Park
#4,  3110-51 Avenue NW
Edmonton, AB   
T6P 0E1

P 780.463.4049
F 780.461.7009
google map
Calgary

Building B - Bay 25
2419 52 Avenue SE
Calgary, AB     
T2C 4X7

P 403.279.7007
F 403.279.7992
google map
Copyright © 2013 Quest Gasket and Supply Inc. All rights reserved.             Powered by Powered by Thinksoft